Flash Plug-In required
FLOWSTAR™ an automatic inline pressision volumetric liquid filler for viscous and semi-viscous products. This liquid filler is designed to meet a wide range of packaging needs. The FlowStar™ is ideal for both long and short production operations. It is especially time-saving for operations where short changeover times are critical.

FlowStar™ versatility can accommodate either electromagnetic flowmeter, mass flowmeter or volumetric piston fills. It can reliably and accurately fill bottles in quantities from 5 ml to 20 L at speeds from 15 to 200 BPM*. (Subject to testing with samples).
FlowStar™ also available with PacDrive Servo
SPECIFICATIONS
Minimum Maximum
Bottle Diameter: 15 mm 150 mm
0.4 in
6 in (larger size available on over-sized machine)
Bottle Height: 20 mm (0.8 in) 350 mm (14 in)
Filling Capacity: 5 ml (0.5 ml)
20 000 ml (Flowmeter/Massmeter), 1000 ml (piston)
Speed: 15-200 BPM*
Power Supply: 220 Vac, 1-3 phase, 60 Hz
Air Supply:
15 cfm @ 90-100 psi for non-explosion-resistant version
* Subject to test with samples
NOTE: The customer will specify their site power requirements at the time of ordering.
Site Map - © 2007 Capmatic Ltd.